How to Make A Chainsaw Winch? | Complete Guide to Making a Chainsaw Winch!

Chainsaw winches are a great way to quickly and safely move heavy objects. Whether you’re looking to move logs, boulders, or even vehicles, a chainsaw winch can help you make the job easier. 

A chainsaw winch can be a great addition to your arsenal. A chainsaw winch is attached to the end of your chainsaw and allows you to use the power of the saw to pull objects. It’s a simple tool that can be very useful in a variety of situations. 

But how exactly do you make a chainsaw winch? It’s actually quite simple when you have the right tools and materials. You can even easily make a homemade chainsaw winch with an old chainsaw available at home and can save you lots of money. 

In this article, we will provide detailed instructions on how to make a chainsaw winch with minimal effort and cost. Whether you’re an experienced DIYer or just getting started with woodworking projects, these tips are sure to help get your chainsaw winch up and running in no time!

What is Chainsaw Winch and How Does it Work?

A chainsaw winch is a simple and effective way to move logs or other heavy objects with your chainsaw. It consists of a winch (a spool of rope or cable), a chain, and a hook. To use it, simply attach the hook to the object you want to move, wrap the chain around the object, and wind the winch to pull the object toward you.

Chainsaw winches are available in a variety of sizes and styles to suit your needs. If you regularly work with large logs, a heavy-duty chainsaw winch is a worthwhile investment. For occasional use, a smaller, lighter-weight model will suffice.

No matter what size or style you choose, always read the manufacturer’s instructions carefully before using your chainsaw winch. And be sure to follow all safety guidelines when working with heavy objects.

What is Chainsaw Winch and How Does it Work

Pre-Steps to Building a Chainsaw Winch

If you’re looking to add a chainsaw winch to your arsenal of logging tools, there are a few pre-steps you’ll need to take first. In this section, we’ll cover what you need to do before you can start building your chainsaw winch.

  1. Choose the right spot to build your winch. You’ll need a level area that’s large enough to accommodate the size of the winch you’re planning to build.
  2. Gather the materials you’ll need. For this project, you’ll need some basic lumber, some steel cable, and a few other supplies that can be found at most hardware stores.
  3. Cut the lumber to size. This is probably the most important step, as it will determine the overall size and strength of your winch. Make sure to use a saw with a sharp blade so that your cuts are clean and precise. 
  4. Assemble the frame of the winch. This is relatively simple – just screw or nail the pieces of lumber together according to your plans. If everything fits together correctly, your frame should be nice and sturdy.
  5. Attach the cable to the frame. This is where things start to get a little more complicated. First, you’ll need to thread one end of the steel cable through one of the pulleys on the frame. Then, you’ll need to secure it in place with clamps.

Step-by-Step Guide to Making a Chainsaw Winch

If you’re looking for a way to make your chainsaw even more versatile, then look no further than a chainsaw winch. By following this step-by-step guide, you’ll be able to turn your chainsaw into a powerful winching machine in no time.

1: Use Stainless Steel Wire and hooks

To start, you’ll need to gather a few supplies. You’ll need a length of rope or chain, as well as some sturdy straps or hooks. Once both of your supplies are gathered, it’s time to start setting up the winch. Start by tying one end of the rope or chain around the tree trunk (or whatever else it is you’re wanting to pull). Make sure the knot is tight and secure – you don’t want it coming undone while in use!

Use Stainless Steel Wire and hooks

2: Build a pulley system

Next, you’ll also need something to use as a pulley system – an old bicycle wheel will do the trick nicely. Then thread the other end of the rope through the center of the bicycle wheel (or another pulley system), and then back around the tree trunk. Again, make sure everything is nice and secure before moving on.

3: Make Winch Base

For making a nice winch base, attach and combine flat channels, flat iron, and angles. When all three parts are attached a perfect base will be ready. 

Then Get rid of the tail shaft from a gearbox which you will need after making the base. Then find an inner rubber tube there and cut the rubber exactly the size of the box’s rear plate.

4: Wield Channel

Cut the U-shaped channel which is quite thick into pieces. Make sure the size of each piece is 3x10x3 inches and not too much small from this. And wield the channels.

5: Fix the handle

To make sure that the handle is easy to use and comfortable then fix the winch handle.

Fix the handle

6: Set up Transmission

Now the final stage process will start for that, connect the main shaft with the transmission. Then in the metal plate drill a few holes and combine them with it crankshaft and drum brackets.

7: Last step

And make sure to connect the chainsaw in place of the bar. Now it’s time to get your chainsaw involved. Start by firing it up and revving the engine until it’s nice and warm – this will help ensure that the blade doesn’t overheat during use. And start winching the object.

What Can Chainsaw Winched be used for?

There are many ways to use a chainsaw winch. The most popular way is to use it as an anchor point when felling trees. It can also be used to haul logs, clear brush, and move heavy objects.

A chainsaw winch can also be used for search and rescue operations. It can be used to reach people who are stranded or caught in difficult situations.

What Limits the Use of Chainsaw Winches?

There are a few factors that limit the use of chainsaw winches. The chief among these is the power source. Chainsaw winches need a lot of power to operate, and most household circuits can’t provide enough juice.

Another limiting factor is the weight of the load. Most chainsaw winches are only rated to lift loads to about a ton, so anything heavier than that is off-limits. 

Finally, chainsaw winches are designed for short-term use. If you try to operate one for more than an hour or so at a time, it will overheat and shut down.

What Limits the Use of Chainsaw Winches

Using a Chainsaw Winch: Advantages and Disadvantages

A chainsaw winch is a great way to move logs around your property, but there are some advantages and disadvantages to using one. Here are some things to consider before you purchase a chainsaw winch.


  1. Chainsaw winches can make it easier to move heavy logs.
  2. They can help you clear fallen trees and branches from your property.
  3. Chainsaw winches can be used to pull stumps out of the ground.


  1. Chainsaw winches require a certain amount of maintenance and care.
  2. If not used properly, chainsaw winches can damage your saw. 
  3. Chainsaw winches are expensive.

How To Make a Chainsaw Winch – FAQs

How do you turn a chainsaw into a winch?
You can easily turn a chainsaw into a winch by following a few points. The first step is to find a good location for attaching the winch. make sure that the object is close enough that the chain will reach it. Next, it’s time to attach the winch. Most chainsaw winches come with all of the necessary hardware, so simply follow the instructions that came with your particular model and now it’s time to start cutting! Begin by making a few cuts into the tree or branch that you’re trying to move. And pull away after a few cuts are made. Assemble the frame of the winch. Attach the cable to the frame for that first, you’ll need to thread one end of the steel cable through one of the pulleys on the frame. Then, you’ll need to secure it in place with clamps. Then make the winch base, set the transmission, and finally connect the chainsaw in place of the bar and start winching.
How do you crank a chainsaw?
Most chainsaws have a two-step process for starting them. The first step is called “priming.” To prime the chainsaw, you need to pump gas into the carburetor. There is usually a primer button near the carburetor that you press to do this. Once you have pumped enough gas into the carburetor, the second step is pulling the starter cord. The starter cord is usually located near the handle of the chainsaw. You will need to pull on the cord until the engine starts.
Can you run a winch off a battery?
You can run a winch off a battery, and in fact, it’s quite common. All you need is a good-quality battery and a charger that is compatible with your particular winch. You’ll also want to make sure that the battery is properly secured so that it doesn’t come loose during use.
Can a battery charger power a winch?
Yes, a 12-volt battery charger can power an electric winch that can supply up to or more than 55 amps of power to your winch.
Will a deep-cycle battery run a winch?
Yes, a deep cycle battery can run a winch without any doubt it is recommended a high reserve capacity have enough high-rate current can turn on its engine.
What can I use instead of a winch?
If you don’t have a winch then try adjoining your vehicle with locking differentials, as most vehicles nowadays come with adding lockers to the rear axle.



Making your own chainsaw winch can be a great way to save money and get the job done quickly. With the right tools and materials, you can easily create a winch with minimal effort. Whether it’s used for work or play, having your own homemade chainsaw winch is sure to come in handy when tackling difficult tasks that require extra power. 

We hope this article has provided all of the information needed to make your very own chainsaw winch so that you can complete any project more efficiently!

Join The Discussion