In the market for a new chainsaw? If so, congratulations chainsaws are some of the most versatile and powerful tools around. But before you can start putting that new chainsaw to work, you need to know how to untangle a chainsaw chain.
If you’re like me, the sight of a chainsaw chain wrapped around the bar sends shivers up your spine. Thankfully, there’s an easy guide to follow for untangling a chainsaw chain. In this article, we’ll walk you through each step so you can get your chainsaw back in working order in no time and get an idea of how to untangle a twisted chainsaw chain.
This step-by-step guide will show you how it’s done and how to untangle a chainsaw chain installation. So read on, learn untangling chainsaw chains like a pro, and get ready to take on those logs!
How to untangle a chainsaw chain?
Chainsaw chains can become tangled for a variety of reasons, such as if the chain becomes caught on a piece of wood, or if it becomes twisted around the bar.
To untangle a chainsaw chain, you’ll need to remove the bar from the saw. Once the bar is removed, you can use a pair of pliers to gently pull the chain away from the bar. Be careful not to twist or kink the chain while you’re untangling it.
Which way does the chain go on the chainsaw?
There are two ways to put the chain on a chainsaw – with the teeth pointing downwards (towards the ground) or with the teeth pointing upwards (towards your arm/hand).
Most people think that the chain should go on with the teeth pointed downwards so that if it slips off, it will fall away from you.
However, some people believe that it’s safer to have the chain pointing upwards so that if it does slip off, it will fall onto the ground instead of towards you.
In reality, either way, is safe as long as you’re careful and maintain control of the chainsaw.
The teeth pointing downwards:
If you choose to put the chain on with the teeth pointing downwards, here are the steps to follow:
- Loosen the screws that hold the guide bar in place (you may need an Allen wrench for this).
- Slide the guide bar off of the chainsaw engine.
- Remove the chain from around the guide bar.
- Make sure that the chain is facing in the correct direction (with the teeth pointing downwards).
- Reattach the guide bar to the chainsaw engine, making sure that it’s tight and secure.
The teeth pointing upwards:
However, in general, the chain should go on the chainsaw with the teeth pointing upwards so that they cut into the wood as you’re sawing. If the chain is installed backward or upside down, it can cause damage to the saw and may even result in injury. Always consult your chainsaw’s owner’s manual for specific installation instructions.
How to untangle a chainsaw blade?
There are a few things you can do to help loosen a chainsaw blade that’s become tangled. First, try spraying the blade with some WD-40 or another lubricant. If that doesn’t work, you can also try gently tapping the blade with a hammer. If neither of those methods works, you may need to use some kind of saw chain breaker tool to untangle the blade.
What to do with an old chainsaw chain?
An old chainsaw chain can be recycled by breaking it down into small pieces and then melted down to make new chainsaw chains.
The process of recycling an old chainsaw chain is fairly simple. The first step is to break the chain into small pieces with a hammer or chisel. Once the chain is in small pieces, it can be placed in a melting pot and heated until it liquefies. Once the metal has liquefied, it can be poured into a mold to create new chainsaw chains.
How to untangle a twisted chainsaw chain?
First, make sure the chain saw is turned off and that the chain is cool to the touch. If it’s still warm, you could burn yourself.
Next, use a wrench to loosen the screws on the cover of the chainsaw. This will allow you to access the chain inside.
Now, find where the twisted links are in the chain and use a handsaw or wire cutter to cut them out. Make sure you cut on both sides of each link so they’re completely removed from the chain.
Finally, put everything back together and tighten all of the screws using your wrench. Be careful not to over-tighten them or you could strip them.
How to unkink a chainsaw chain?
If the chain is kinked because it’s too tight, you can try to loosen it by gently pushing or pulling on either end of the chain. If that doesn’t work, you can use a pair of pliers to gently twist the links back into place.
If the chain is kinked because it’s been bent too far out of shape, you might be able to fix it yourself by using a link tool to open and close specific links until they’re in the correct position. If that doesn’t work, you’ll need to take your bike to a professional bike mechanic.
How to untangle a chainsaw chain installation?
One is to make sure the chain is lubricated before installation. This will help it move more freely. Another thing you can do is to use a chainsaw chain tool to help push the links of the chain together. And finally, make sure that the chain is installed on the correct bar side. If it’s installed on the wrong side, it will be more difficult to untangle.
Chainsaw won’t cut straight
It sounds like you might not be cutting with the chainsaw in the right direction. Always cut with the chainsaw’s blade running parallel to the wood, not perpendicularly. If you’re still having trouble getting a clean-cut, it might be time to sharpen the blade.
How long does a chainsaw chain last?
It depends on how you’re using it. If you’re only cutting small branches or trimming trees, a chainsaw chain can last for several months. However, if you’re using it to cut down large trees, the chain will need to be replaced every few weeks.
Chainsaw chains are designed to cut through wood, so they will wear down over time if used for other materials such as metal or concrete. Additionally, a chainsaw chain will last longer if it’s properly sharpened and lubricated. So make sure you take care of your chainsaw chain by sharpening it and lubricating it regularly, and it should last for several months.
How to Untangle a Chainsaw Chain – FAQs
Our Verdict:
So, those are the basics of how to untangle a chainsaw chain. It’s important to be careful when doing so, as you don’t want to damage the chain or injure yourself in the process. Always make sure that the chain is properly lubricated and sharpened, and take it easy when cutting wet wood. And if all else fails, take it to a professional bike mechanic.
